Highest Bio-Content Spray Foam Insulation

Technical Data

SES Foam’s products are 0.5 and 1.0 open cell spray foam which have unique features which have allowed these products to have patents pending.

Both products pass the 377 appendix x test uncoated. SES Foam is one of the few companies to provide low density products that pass the appendix x test uncovered. This means that our product can be applied where the applicable to appendix x without the use of an ignition barrier. This performance by a foam alone exceeds the standards required of foam. Ignition barriers are common in the industry and it is uncommon for a low density product to pass these tests without an ignition barrier.

SES Foam products have the some of the highest bio-based content in the industry. This high bio-based content has been confirmed by ASTM-6866 and refers to the final foam product. Our products contain 17% for 0.5 lb foam and 25% for the 1.0 lb foam of bio-based content in the finished foam and our resin contains considerably higher bio-based content. This unique technology provides a truly differential product to the contractor applying the product and more importantly to the final customer to have peace of mind that they have made the bio-basedest choice available today.

Our technology in the 0.5/lb and 1.0/lb products is significantly different from typical urethanes, with a superior performance in the 377 appendix x test and a high bio-based content, which explains why these products are patent pending. These two unique products are now available in the market from our contractor network.

Half Pound Foam

SES/SucraSeal is proud to announce its latest development 0.5/lb foam which passes 377 appendix x uncoated. In addition to this superior performance in the appendix x test SES also has what we believe is the highest bio-based content of any spray polyurethane on the market other than SES Foam own 1.0/lb product.

SucraSeal foam coupled with high quality contractors can assure your project is done correctly with this new technology. This new high bio-based content 0.5/lb product contains over 15% bio-based content in the finished foam. This is extremely high most polyurethane foam products cannot achieve this value in the resin let alone the finished foam. Our values were obtained from ASTM-6866.

SucraSeal’s 0.5/lb product is a true polyurethane with the high insulating properties you expect from polyurethanes including air sealing capabilities with high flow rates to ensure every nook and cranny are closed to provide you with an extremely tight building envelope. Couple this ability with our high quality contractors who can assure that the product is applied correctly and that the application meets the requirements of your structure.

Download PDFMSDS SES 1/2 LB SPRAY FOAM A SIDE 3 21 2011.
Download PDFMSDS SES 1/2 LB SPRAY FOAM B SIDE 3 21 2011
Download PDFTDS SES FOAM
1/2 lb SPRAY 03 17 2011
Download PDFCode Compliance Research Report
SES 1/2 lb. Spray
Download PDFFACT SHEET:
SES 1/2 LB SPRAY FOAM
Download PDFINSTALLATION INSTRUCTIONS:
SES 1/2 LB SPRAY FOAM
Download PDF

SES 1/2 LB SPRAY FOAM CODE COMPLIANCE RESEARCH REPORT TPR2 AND MAXIMUM THICKNESS

Download PDF

SES/SUCRASEAL RECOMMENDED PROCESSING PARAMETERS

Download PDF

SUCRASEAL INSULATION CERTIFICATE

One Pound Foam

This product is class 1 as determined by ASTM E-84, and has passed 377 appendix X. SES Foam is one of the few companies to provide low density products that pass the appendix x test uncovered. This means that our products can be applied where the applicable to appendix x without the use of an ignition barrier. This performance by a foam alone exceeds the standards required of foam. Ignition barriers are common in the industry and it is uncommon for a low density product to pass these tests without an ignition barrier. This superior performance in the 377 appendix x test and the high bio-based content explain why our products are patent pending. The product has over 23% bio-based content as determined by ASTM D-6866. The combination of bio-based content and excellent fire properties make this a wonderful addition to the spray polyurethane product offerings available in the market today. 1.0/lb density was chosen as our initial entrance into this market based on the ability to fill a 3.5” stud wall without trimming and exceed an R-value of 13. This reduction in trimming follows the company value of being bio-based.

SES Foam 1.0 lb Spray has the highest bio-based content currently available in the market. This high content has not reduced the performance of the product at all in fact through our unique formulating we have been able to produce foam that has fire properties exceeding what is currently available in the market. The comments concerning fire properties and bio-based content are all backed by ASTM testing and the product should always be used in applications where the testing reported meets the requirements.

SES Foam 1.0 lb Spray components are user friendly and allow for a wide range of storage temperatures yet do not require mixing and will not freeze at temperatures above 32F. Due to the lack of auxiliary blowing agents the product can also be stored at high temperature and once again will not require mixing and there will be no deterioration of performance.

SES Foam 1.0 lb Spray although unique in its performance remains a polyurethane and possesses all the exceptional insulating properties of polyurethanes. Safety procedures required for the use of the product are the same as those for all spray polyurethanes and spelled out in the links provided on this site.

Download PDFSES FIRE FOAM 1.0
A- MIXTURE
Material Safety Data Sheet
Download PDFSES FIRE FOAM 1.0
B- MIXTURE
Material Safety Data Sheet
Download PDFSES FIRE Techical Data Sheet
Download PDFCode Compliance Research Report
SES 1/lb. Spray
Download PDFFACT SHEET:
SES 1 LB SPRAY FOAM
Download PDF

SES/SUCRASEAL RECOMMENDED PROCESSING PARAMETERS

Download PDF

SUCRASEAL INSULATION CERTIFICATE

Spray1